IPC@CHIP® on board

Starter kit embedded controllers

The complete development system for embedded controllers.

It is difficult to imagine modern products without embedded controllers. From washing machines to cars, there are few products without one.

The starter kit contains all of the hardware and software functions required for a custom developed controller. You can now add to your application-specific components and conveniently program the controller using C++ or in accordance with IEC 6-1131 as well as create your own web pages.

Serial cable and power supply unit included.

Technical data:

Power supply 24 V DC
Serial interface (RS232), 1x COM, 1x EXT
Ethernet interface 10/100 MBit/s
Compact flash interface
8 programmable I/O pins with LED
Digital expansion board with 4 programmable chip select signals
Power fail and reset button
Free grid space for application extensions

Characteristics:

Company:

Link to company: ^**

Contact:

Festo Didactic GmbH & Co. KG

IPC@CHIP® on board checklist:

IPC@CHIP® Product:
SC13-IEC

Ethernet

RS232: 2

PIO: 14

A/D Bus

Interrupts: 6

SPI / I²C

Remanent Data

External memory disk

Watchdog

TCP/IP

PPP

Webserver

FTP

Telnet

SNMP

SMTP

DHCP

CoDeSys


Referenzsheet SK Embedded Control RS_SK-EMBEDDED-CONTROL_DE_V1.PDF	76K	07.04.2006
Reference sheet SK Embedded Control RS_SK-EMBEDDED-CONTROL_EN_V1.PDF	76K	07.04.2006

** Disclaimer: www.ipcatchip-onboard.com makes links to third part offerings available within a special area of its website. The publishers of the websites to which these links make reference are solely liable for their contents, and particularly for damages which result from use or non-use of provided information. www.ipcatchip-onboard.com only examines these websites at the point in time at which the link is established. Any and all changes which occur at a later point in time are the responsibility of the publishers of such websites.

Back