IPC@CHIP® Embedded Web Controller
SC123
SC13-IEC

IPC@CHIP® SC123, is high performance embedded Web Controllers designed specifically for embedded control, communications and Ethernet connectivity.

The IPC@CHIP® is a ready to use combination of hardware and software.




 A few technical details
ProcessorSC186EX/96 MHz
Working memory (RAM)8 MB
Flashmemory (disk)2 MB (1 MB)
Serial4x TTL, 4-wire with DMA
Ethernet1x10/100BaseT, 1xMII
USBUSB1.1
CAN2 x CAN2.0b
I/O31 PIO, Intel AD-Bus
Power consumption< 2Watt
Operating systemRTOS
HousingBGA177 (25x25 x 5 mm)
IEC61131-3-
 

The Embedded Web Controller not only offers a pre-installed RTOS, but provides with its integrated PLC, Web and communication functions the readyto-use development and runtime environment for your application.

Pre-installed software functions:

  • Multitasking/real-time operating system with Flash file system
  • Complete TCP/IP Stack, FTP, HTTP, PPP, Telnet, DHCP, SMTP, IGMP, TFTP, SNMP
  • Software interface (API) and libraries for simple access to all operating system functions and protocols
  • Applications can be created in Paradigm C/C++ Beck Edition and/or directly in CoDeSys IEC61131-3


  Characteristics:
Company: Link to product: ** Link to company: ** Contact:
Beck IPC GmbH
Beck IPC GmbH
www.beck-ipc.com/sc123 www.beck-ipc.com info@beck-ipc.com

  IPC@CHIP® on board checklist:
BGA housing
IPC@CHIP® Product: SC123
 Ethernet RS232 PIO A/D Bus
 Interrupts SPI / I2C Remanent Data External memory disk
 Watchdog 
 TCP/IP PPP Webserver FTP
 Telnet SNMP SMTP DHCP
 CoDeSys 






PDF Referenzsheet SC123
134K 01.11.2005
PDF Reference sheet SC123
134K 01.11.2005


**  Disclaimer: www.ipcatchip-onboard.com makes links to third part offerings available within a special area of its website. The publishers of the websites to which these links make reference are solely liable for their contents, and particularly for damages which result from use or non-use of provided information. www.ipcatchip-onboard.com only examines these websites at the point in time at which the link is established. Any and all changes which occur at a later point in time are the responsibility of the publishers of such websites.



Back     Back